MasterCraft 058-7732-0, Инструкция по эксплуатации

Страница: 8 / 23

SAFETY GUIDELINES
8
AIR-POWERED SHEAR 058-7732-0
CAUTION!
Potential hazard that may result in moderate injury or damage to
equipment.
• Always ensure that the tool has stopped before connecting the tool to the air
supply.
• Do not wear watches, rings, bracelets, or loose clothing when using any air
tool.
• Maintain proper footing at all times in order to ensure correct balance.
• Do not overload the tool. Allow the tool to operate at its optimum speed for
maximum efficiency.
• Do not use a tool that is leaking air, with missing or damaged parts, or that
requires repairs. Verify that all screws are securely tightened.
• For optimal safety and tool performance, inspect the tool daily in order to
ensure free movement of the trigger, safety mechanisms, and springs.
• Always keep your air tool clean and lubricated. Daily lubrication is essential
to avoid internal corrosion and possible failures.
• Keep the work area clean. A cluttered or dirty workbench may lead to an
accident. Floors should be kept clear.
• Use the tool only in a well
-
ventilated area.
• Handling and storage of oil: Use with adequate ventilation. Avoid contact of
oil with eyes, skin, and clothing. Avoid breathing spray or mist. Store in a
tightly closed container in a cool, dry, well
-
ventilated area free from
incompatible substances.
• Do not use the tool near or below freezing temperature, as doing so may
cause tool failure.
• Do not store the tool in freezing temperatures to prevent ice formation on
the operating valves of the tool, as doing so may cause tool failure.