MasterCraft 058-7732-0, Инструкция по эксплуатации

Страница: 16 / 23

MAINTENANCE
16
AIR-POWERED SHEAR 058-7732-0
Storage
If it is necessary to store the tool for an extended period of time, apply a generous amount of
lubrication before storing. The tool should be allowed to run for approximately 30 seconds after
lubricating in order to ensure that the lubrication is uniformly distributed throughout the tool.
Maintenance
CAUTION!
Potential hazard that may result in moderate injury or damage to
equipment.
• The tool should be stored in a clean and dry environment. Failure to comply
may result in moderate injury or damage to equipment.
MAINTENANCE
REQUIRED
DESCRIPTION
TOOLS OR
MATERIALS
REQUIRED
MAXIMUM SERVICE INTERVAL
Each use or
every 2 hrs.
Monthly
As
needed
General inspection
-
free movement
Trigger, spring,
safety mechanism
None X
In
-
depth inspection
Worn or broken
parts
X X
Replace worn or
broken parts
X
Lubrication See below
pneumatic tool
oil
X
• Lubrication: If the
Air-powered Shear
and the
compressor are not equipped with an in
-
line
lubrication system, place up to 6 drops of
pneumatic tool oil into the air inlet before each
work day or after every 2 hours of continuous use,
based on the characteristics of the workpiece.
MC-587732-12
OILDAIL
Y