11
AVAILABLE ACCESSORIES
WARNING:
Use only nails and
staples recommended for this
nailer/stapler. Follow instructions that
accompany the nails and staples.
Improper use of nails or staples may
cause injury to the operator or damage
to the nailer/stapler.
Do not use any nails or staples unless you
have completely read the instructions on
the package and those contained within
this
Owner’s Manual.
18 Gauge brad nails
1/4
–5/8” (6–16 mm) long
T50 3/8" (10.6 mm) wide staples
1/4
–5/8" (6–16 mm) long
WARNING:
If any part is missing
or damaged, do not plug the tool into
the power source or insert nails or
staples into the nailer/stapler magazine
until the missing or damaged part is
replaced.
CARTON CONTENTS
Carefully unpack the nailer/stapler.
Compare against the “Nailer/Stapler
Components” chart below.
NOTE:
See illustration of components
below.
WARNING:
To avoid fire or toxic
reaction, never use gasoline, naphtha,
acetone, lacquer thinner or similar
highly volatile solvents to clean the
tool.
ACCESSORIES AND CONTENTS
CARTON CONTENTS
!
!
!
NAILER/STAPLER
COMPONENTS
KEY
DESCRIPTION
QTY
A
Nailer
1
Brad nails
5/8" (16 mm)
(Not shown)
100
Crown staples
3/8" (10 mm)
(Not shown)
400
Owner’s manual
1
