MasterCraft 054-8251-6, Инструкция по эксплуатации

Страница: 5 / 13

CORDED MULTI-CRAFTER KIT - 054-8251-6 CORDED MULTI-CRAFTER KIT - 054-8251-6
7 8
• Wear ear protection when using the multi-crafter.
Exposure to noise can cause hearing loss.
• Keep your hands away from the motor housing vents.
Hot gas comes from the vents during
operation.
• Do not use sanding paper larger than needed. Extra paper extending beyond the sanding pad
can cause serious lacerations.
• Wear protective gloves when changing cutting tools. Cutting tools become hot after prolonged
use.
• Keep hands away from the cutting range.
Do not reach under the workpiece. Contact with the
blade can lead to injuries.
Contents:
Multi-crafter, 2 pcs flush-cutting saw blades, segmented saw blade, flexible scraper blade, sanding
pad, 5 pcs sanding paper (2 pcs 60 grit, 2 pcs 80 grit, 1 pc 120 grit), additional adaptor for fitting
DREMEL
®
accessories, hex key and instruction manual.
WARNING!
Remove the multi-crafter from the package and examine it carefully. Do not discard the
carton or any packaging material until all parts have been examined.
SAFETY GUIDELINES
Safety guidelines for multi-crafter
• Hold power tools by insulated gripping surfaces when performing an operation where the
tool may contact hidden wiring or its own cord. Contact with a “live” wire may make exposed
metal parts of the power tool “live” and could give the operator an electric shock.
• The label on your tool may include the following symbols. The symbols and their
definitions are as follows:
V ..................... Volts
A ..................... Amperes
Hz ................... Hertz
W .................... Watts
min ................. Minutes
............... Alternating current
............. Direct current
n
0
................... No-load speed
............... Class II Construction
…/min ........... Revolutions per minute
............... Grounding terminal
BPM ............... Beats per minute
.............. WARNING – To reduce the risk of injury, user must read instruction manual .
• Secure the workpiece.
A workpiece clamped with clamping devices or in a vice is held more
secure than by hand.
• Wear protective gloves when changing cutting tools.
Cutting tools become hot after prolonged
usage.
• Always wear eye protection.
• Take protective measures when dust that is harmful to one’s health, combustible or
explosive can develop during working. Example: Some dusts are regarded as carcinogenic.
Wear a dust mask.
• Use the machine only for dry sanding.
Penetration of water into the machine increases the risk
of an electric shock.
• A suitable breathing respirator must be worn while sanding lead paint, some woods and
metal to avoid breathing the harmful/toxic dust or air.
SAFETY GUIDELINES