MasterCraft 054-1249-6, Руководство пользователя

Страница: 7 / 26

7
WARNING:
Know your cordless
rotary tool. Do not plug in the charger
until you have read and understand this
Owner’s Manual. Learn the tool’s
applications and limitations, as well as
the specific potential hazards related to
this tool.
Following this rule will reduce the
risk of electric shock, fire, or serious injury.
Always wear eye protection. Any power
tool can throw foreign objects
into your eyes and cause
permanent eye damage.
ALWAYS wear safety goggles
(not glasses) that comply with ANSI safety
standard Z87.1. Everyday glasses have
only impact resistant lenses. They ARE
NOT safety glasses.
WARNING:
Glasses or goggles
not in compliance with ANSI Z87.1
could cause serious injury when they
break.
Hold tool by insulated gripping surfaces
when performing an operation where the
cutting tool may contact hidden wiring or
its own cord. Contact with a “live” wire will
make exposed metal parts of the tool “live”
and shock the operator.
Always make sure the work surface is free
from nails and other foreign objects.
Cutting into a nail can cause the bit and
the tool to jump and damage the bit.
Never hold the workpiece in one hand and
the tool in the other hand when in use.
Never place the hands near or below the
cutting surface. Clamping the material and
guiding the tool with both hands is much
safer.
Never lay the workpiece on hard surfaces
like concrete, stone, etc. Protruding cutting
bit may cause the tool to jump.
Always wear safety goggles and a dust
mask. Use only in a well-ventilated area.
Using personal safety devices and working
in a safe environment reduces the risk of
injury.
After changing the bits and accessories or
making adjustments, make sure the collet
nut and any other adjustment devices are
securely tightened. Loose adjustment
devices will be violently thrown.
Always use the correct collet size. If the
collet size is larger than the accessory
shank size it will not grip the shank
properly, leading to possible injury to the
operator or damage to the tool.
Always check accessory bits, grinding
stones, cut-off wheels etc. for damage
before each use. Damaged accessories
can break during use and cause serious
injury.
Never use dull or damaged bits. Sharp bits
must be handled with care. Damaged bits
can snap during use. Dull bits require more
force to push the tool, possibly causing the
bit to break.
Never touch the bit during or immediately
after its use. After its use the bit is too hot
to be touched by bare hands.
!
!
!
SPECIFIC SAFETY RULES