MasterCraft 054-1249-6, Руководство пользователя

Страница: 20 / 26

20
SELECTING PROPER SPEEDS
Different speeds are required depending
upon the type of operation being
performed. The following chart outlines
those basic speeds:
ASSEMBLY AND OPERATING
WARNING:
Have you read
“GENERAL SAFETY WARNINGS”,
“POWER TOOL SAFETY”,
“SPECIFIC SAFETY RULES”,
“BATTERY AND CHARGER
SAFETY” and “SYMBOLS” on pages
3, 4, 5, 6, 7, 8 & 9 of this Manual? If
not, please read them now before
you operate this rotary tool. Your
safety depends on it!
Every time you use the rotary tool
you should verify the following:
1. The accessory is in good
condition and not damaged in
any way.
2. The workpiece is properly
secured.
3. Safety glasses are being worn.
Failure to adhere to these safety
rules can greatly increase the
chances of injury.
!
OPERATION SPEED
Cutting metal Medium / high
Sanding wood Medium / high
Cutting hard metal Medium / high
Engraving metal Medium
De-burring Medium
Drilling holes Medium
Removing rust Slow / medium
Sharpening Slow / medium
Polishing Slow