MasterCraft 054-1249-6, Руководство пользователя

Страница: 8 / 26

8
WARNING:
The lithium-ion battery
is an integral part of the tool. If it no longer
charges properly or is damaged, the tool
and battery must not be discarded as
household trash, burnt or thrown into
water. The tool and battery must be
disposed of as hazardous waste in
accordance with all municipal
requirements.
Do not incinerate a discarded battery. It
can explode in a fire.
Do not use an extension cord. Plug the
charger cord directly into an electrical
outlet.
Charge the battery only with the charger
supplied with this cordless rotary tool.
Do not use the charger to charge any
batteries other than the cordless rotary tool
battery. Other batteries may explode.
Do not use the charger in wet or damp
conditions. It is intended for indoor use
only. Do not use the charger near sinks or
bathtubs. Do not immerse the charger in
water.
Do not allow the cord to hang over the
edge of a table or counter or touch hot
surfaces. The charger should be placed
away from sinks and hot surfaces.
Do not operate the charger if the cord or
plug is damaged. Replace the damaged
cord and plug immediately.
Do not operate the charger if it has
received a sharp impact, been dropped or
otherwise damaged in any way. Have a
qualified technician examine the charger
and repair it if necessary. Do not
disassemble the charger.
For best results, charge the battery when
the temperature of the battery and the
work area is at or above 0° C (32° F) and
below 45° C (113° F).
Unplug the charger when not in use and
before cleaning or maintenance.
Do not abuse the cord. To reduce the risk
of damage to the electric cord or plug,
never carry the charger by the cord or
yank the cord to unplug the charger.
Always grasp the plug and pull to
disconnect. Always keep the cord away
from heat, oil and sharp edges.
BATTERY AND CHARGER SAFETY
!