Mastercook Dynamic KGE-3468ZSB DYN, Инструкция по эксплуатации

Страница: 41 / 44

40
EN
Problem Solution
While igniting one of the burners all the
hob burner igniters spark
It is normal
When pressing the selected knob (with a built-in ignition device) or the
ignition button sparks are re-leased at all the burners .
After setting the knob to simmering lame
position
- the lame dies or is too high
Avoid draughts in the kitchen, –
Call the itter to adjust simmering lame position –
.
Flame is unstable
Check to make sure that the burner components are clean, dry and –
placed correctly.
Parts made of stainless steel (inox) deve
-
lop stains that cannot be removed with the
use of standard cleaners
Stainless steel surfaces should be cleaned – each time they get soiled
and only with the use of special stainless steel cleaner.
Smoke coming out of the oven
Open the windows to air the kitchen, –
When the oven cools down, clean its interior. –
Use the drip tray when grilling foods. –
Oven light does not function 1. Check to make sure the cooker is connected to the electrical mains.
2. The bulb is burnt or not screwed all the way in.
Disconnect the cooker from the electrical mains before ixing the
fault.
Unscrew glass bowl 1 from light socket 2 and screw bulb 3 all the –
way in or replace the bulb with a new one (bulb type: E14 230V 25W,
resistant to temperature of 300
0
C).
“0.00” pulsates on the display Drop or temporary breakdown of voltage. Take the plug out of the electric
socket, wait for a while, then plug in the cord and set the current time.
Damaged power lead In order to avoid hazards, damaged power lead should be exchanged
at the manufacturer’s or by a specialist servicing point, or by a qualiied
person.
Cooking results are not what you expec
-
ted
The cooking parameters given in the instruction manual should be tre
-
ated as guidance only. In practice, these parameters are dependable on
the weight and consistency of food, cooking tray level, etc. Therefore, we
recommend making a few trials for your favourite foods and then writing
down the optimal time and temperature.