Master MAS-F20white, Руководство пользователя

Страница: 65 / 95

65
EN
On a monthly basis, vacuum underneath your treadmill to prevent dust
building up. Once a year, you should remove the black motor shield and
vacuum out dirt that may accumulate
4.2 General Care

Check parts for wear before use.
 Always replace the mat if worn and any other defective parts.
 If in doubt do not use the treadmill and contact our helpline.
TAKE CARE TO PROTECT CARPETS AND FLOOR in case of leakages. This product is a machine
that contains moving parts which have been greased / lubricated and could leak out.
4.3 Belt/Deck/Roller Lubrication
The mat/deck friction may play a major role in the function and life of your treadmill
and that is why we recommend you constantly lubricate this friction point to prolong
the life time of your treadmill.
You should apply the lubrication after approximately the first 40 hours of
operation.We recommend lubrication of the deck according to the following
timetable:Light use (less than 3 hours per week) every 6 months Medium use (3-5
hours a week) every 3 months
Heavy use (more than 5 hours per week) every 6-8 weeks.
See below procedures for lubricating:
1 Use a soft, dry cloth to wipe the area between the belt and deck
2.Spread lubricant onto the inside surface of belt and deck and evenly
(make sure the machine is turned off and power is disconnected)
3.Periodically lubricate the front and rear rollers to keep them at there peak
performance