8
EN
can be adjusted by pressing SPEED+,-. The machine stops when distance shows
0.00.
8.
CALORIE count-down training: Power on the machine, press SET three times,
calorie figure glittering, showing 50CAL. Press SPEED+,- to choose the calorie
between 10-990CAL. Press START to start at speed of 1.0km/h.Speed can be
adjusted by pressing SPEED+,-. The machine stops when calorie shows 0.
3.2 Getting Started
Power the treadmill on by plugging it into an appropriate wall outlet, then turn on
the power switch located at the front of the treadmill below the motor shield.
Ensure that the safety key is installed, as the treadmill will not power on without
it. When the power is turned on, the display is ready for operation.
3.3 Self-Checking
When using for the first time, it is necessary to make the machine carry on
self-check:
l
Remove the safety key, press MODE and hold, then insert the
safety key again, the machine enters into self-checking state. During this state,
pressing START two times , the machine begins to self –check. It stops
automatically after self-checking.
Note: Don’t stand on the machine when self-checking.
3.4 Quick-Start Operation
6.
Press and release the START to begin belt movement, at 1.0 Km/hr, then
adjust to the desired speed using the
or
. You may also use the
quick speed keys ( 2,4,6,8) to adjust the speed. You can also use ‘speed +’ or
‘speed -’to adjust the speed on handrail.
7.
To slow the treadmill down, press and hold the
key to desired speed.
You may also press the rapid speed adjust keys: 2,4,6,8.
8.
In a state of running, single press STOP, the walking belt will gradually slow
down.
9.
In the state of running, single press CLEAR will reset time, distance, calorie.
3.5 Incline Feature
l
Incline may be adjusted anytime after belt movement.
