Page 15
itself;
not all the functions of the radio remote control are listed in this manual.
T
HE TRANSMITTER IS
NOT
FACTORY
-
PROGRAMMED
.
First follow the radio remote control instructions and then those provided
below concerning the specific operation of the station.
The station can accept up to 6 PIK radio remote controls. The same functions only with the
PIK radio remote control with MASTER proprietary code (rolling code).
Save procedure:
- Equip yourself with the radio remote control, checking beforehand that it is working,
has charged batteries and is in good condition.
- Select the “Add” item in the menu.
- Press the “OK” button of the control unit.
- The message “Push” will appear on the display.
- On the PIK radio remote control
(see the instructions provided with the radio remote
control)
, select any channel between CH1 and CH6 and press any one of the
▲
/
▼
ARROW or STOP buttons on the PIK for about 1 second.
- The “OK” message will appear on the display indicating that the save process was
successful.
- The radio remote control is now saved and the motors are controlled by the
respective channels. (CH1=motor 1; CH2=motor 2….. CH6=motor 6)
End
Repeat the procedure for any other radio remote controls.
Advanced procedure: associate desired channels or free a channel (“chc” menu).
- Select the “CHC” item in the menu of the station.
- Press the “OK” button of the control unit.
- The message “Push” will appear on the display.
- Select the desired channel on the PIK radio remote control and press any one of
the
▲
/
▼
ARROW or STOP buttons for about 1 second.
- The list of motors from MOT1 to MOT6 and NULL will appear on the display.
If you want to “free” a certain channel of the PIK (e.g., make it usable for other
applications), select “NULL”.
- Use the +/- buttons of the control unit to scroll through the motors and select the
motor you want to associate with the selected channel.
- Press OK.
- The association is complete.
Repeat the procedure for any other radio remote controls or channels.
6.4.
Saving a radio remote control without access to the board
Saving a new radio remote control remotely, i.e. without access to the electronic board of
the station, can occur only if the user already has a previously saved radio remote control.
