Master Spas INT MP MOMENTUM 80 D Скачать руководство пользователя | Manualshive

Страница: 95 / 116

background image

93

DO NOT DIVE.

WARNING –

Never remain in your swim spa longer than 15 minutes per session when the water

temperature is above 98˚F. If you wish to spend more time in your swim spa, whether enjoying
music, or just lounging, be sure to keep the swim spa water at or below body temperature
(98.6˚F).

WARNING –

Prevent Electrocution. Do not connect any auxiliary/external components to the

system (i.e. cables, additional speakers, headphones, additional Audio/Video components, etc.).

HANDHELD REMOTE CONTROL CHARGING

The remote has a built-in Polymer Lithium rechargeable battery and comes with a charging cable.
Connect one end of the charging cable to the charging connection on remote control and connect
the USB end of the charging cable to any USB charger (5V DC) for charging. Be sure charging
connection is dry or allowed to dry before connecting to charge.

Make sure the remote has been charged before used. Do not leave remote under swim spa cover
when not in use. Always store remote in dry location when not it in use.

HANDHELD REMOTE CONTROL SYNCHRONIZING

The remote should already be paired from the factory, but if you need to synchronize the remote,

follow the steps below:

1.

Make sure B Media Player is powered ON (red LED).

2.

Put the remote within 20 inches (0.5 meter) of the B Media Player.

3.

Press and hold

MODE

PAIR

MODE on remote control untiI the LCD shows “Pairing in Progress”. Re lease

the button.

4.

Within 2 seconds, the LCD will show “Paired”. If it fails to pair, the LCD will show “Retry

again”. If this happens, wait 5 seconds and repeat steps above.

For any additional remote controls, you will also need to synchronize those remote controls to the
B Media Player.

If the pairing process is not successful, try again to put your remote close to the remote
receiver or charge the remote control if the battery is low.

Depending on the frequency of usage, the remote may drain its battery. Please charge the
remote before use. If the LCD shows nothing, the battery has been drained and will need
charging.

If you have lost or damaged your remote control and buy a new remote control, follow the
above steps to pair the new remote control.

FUSION AIR SOUND SYSTEM

(IF EQUIPPED)

REMOTE CONTROL POWER & SYNCING

«
...
93
94
95
96
97
...
»

Содержание INT MP MOMENTUM 80 D





















































































































Отзывы:

Нет отзывов

Похожие инструкции для INT MP MOMENTUM 80 D

Бренд: Calspas Страницы: 60

Бренд: Image Страницы: 20

Бренд: ProForm Страницы: 24

Бренд: PDS spas Страницы: 88

Бренд: Jacuzzi Страницы: 2

Бренд: Jacuzzi Страницы: 2

Experience ALIMIA

Бренд: Jacuzzi Страницы: 72

Бренд: L.A. Spas Страницы: 30

2005 ProTech LED Series

Бренд: Jacuzzi Страницы: 47

SANOSPA XXL1908

Бренд: Sanotechnik Страницы: 60

Бренд: Laurel Mountain Whirlpools Страницы: 4

Бренд: Aquatic Страницы: 1

Бренд: Aquatic Страницы: 1

Бренд: Hot Spot Страницы: 36

Бренд: Hot Spot Страницы: 39

Бренд: Hot Spot Страницы: 40

Бренд: Hot Spot Страницы: 48

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды