background image

6

DO NOT DIVE.

SAFETY INSTRUCTIONS

ImpORTaNT SafeTy INSTRUcTIONS 

(cONT.)

 

b)  Since excessive water temperatures have a high potential for causing fetal 

damage during the early months of pregnancy, pregnant or possibly pregnant 

women should limit spa water temperatures to 38˚C (100˚F).  

 

c)  Before entering a spa, the user should measure the water temperature since the 

tolerance of water temperature- regulating devices varies. 

 

d)  The use of alcohol, drugs, or medication before or during spa use may lead to 

unconsciousness with the possibility of drowning.  

 

e)  Obese persons and persons with a history of heart disease, low or high blood 

pressure, circulatory system problems, or diabetes should consult a physician 

before using a spa. 

 

f)  Persons using medication should consult a physician before using a spa since 

some medication may induce drowsiness while other medication may affect 

heart rate, blood pressure, and circulation. 

(For spas with a gas heater)

 

 WARNING – Risk of Suffocation.  This spa is equipped with a gas heater  and is 

intended for outdoor use only unless proper ventilation can be provided for an 

indoor installation.  

HYPERTHERMIA

 

 Hyperthermia occurs when the internal temperature of the body reaches a level 

several degrees above the normal body temperature of 98.6° F.

 

THE SYMPTOMS OF HYPERTHERMIA INCLUDE:

 

• Dizziness • Fainting • Drowsiness • Lethargy  

 

• Increase in Internal Body Temperature

 

THE EFFECTS OF HYPERTHERMIA INCLUDE:

 

 Unawareness of Impending Hazard • Failure to Perceive Heat • Failure to 

Recognize the Need to Exit Spa • Physical Inability to Exit Spa • Fetal Damage in 

Pregnant Women • Unconsciousness Resulting in a Danger of Drowning

Содержание Cape Cod





























































Отзывы: