Master Plumber 540106 Скачать руководство пользователя страница 2

Страница: 2 / 12

Safety

For parts or assistance, call Master Plumber Pump Customer Service at

1-800-628-9439

GENERAL SAFETY

Electrically powered utility pumps normally give many

years of trouble-free service when correctly installed,

maintained, and used. However, unusual circumstances

(interruption of power to the pump, dirt/debris, flooding

that exceeds the pump’s capacity, electrical or mechani-

cal failure in the pump, etc.) may prevent your pump from

functioning normally. To prevent possible water damage

due to flooding, consult your retailer about a secondary AC

pump, a DC backup pump, and/or a high water alarm. See

the “Troubleshooting Chart” in this manual for information

about common pump problems and remedies. For more

information, see your retailer or call customer service at

1-800-628-9439.
1. Know the pump application, limitations, and potential

hazards.

Do not use in explosive atmospheres.

Pump water only with this pump. Failure

to follow this warning can result in personal injury

and/or property damage.

2. Make certain power source conforms to requirements

of your equipment.

3. Disconnect power before servicing.
4. Release all pressure within system before servicing

any component.

5. Drain all water from system before servicing.
6. Secure discharge line before starting pump. An unse-

cured discharge line will whip, possibly causing per-

sonal injury and/or property damage.

7. Check hoses for weak or worn condition before each

use, making certain all connections are secure.

8. Periodically inspect pump and system components.

Keep pump and system free of debris and foreign

objects. Perform routine maintenance as required.

9. Provide means of pressure relief on pumps whose dis-

charge line can be shut-off or obstructed.

10. Personal Safety:

a. Wear safety glasses at all times when working with

pumps.

b. Keep work area clean, uncluttered and properly

lighted – replace all unused tools and equipment.

c. Keep visitors at a safe distance from the work area.

d. Make workshop child-proof – with padlocks, master

switches, and by removing starter keys.

11. When wiring an electrically driven pump, follow all

electrical and safety codes, as well as most recent

National Electrical Code (NEC) and Occupational Safety

and Health Act (OSHA).

Pump motor is equipped with an auto-

matic resetting thermal protector and

may restart unexpectedly.

12.

Risk of electric shock.

This equipment is

only for use on 115 volt (single phase) and

is equipped with an approved 3-conductor cord and

3-prong, grounding-type plug.

To reduce risk of electric shock, be cer-

tain that it is connected to properly

grounded, grounding-type receptacle.

Where a 2-prong wall receptacle is encountered, it

must be replaced with properly grounded 3-prong

receptacle installed in accordance with the National

Electrical Code and local codes and ordinances.

13. All wiring should be performed by a qualified

electrician.

14. Protect electrical cord from sharp objects, hot surfac-

es, oil, and chemicals. Avoid kinking cord. Replace or

repair damaged or worn cords immediately.

15. Use wire of adequate size to minimize voltage drop at

motor. Refer to most recent National Electrical Code.

16. Do not touch an operating motor. Modern motors can

operate at high temperatures.

17.

The oil-filled motor was not designed for use in water

containing fish.

Do not use this pump in water with fish

present.

SPECIFICATIONS

Power supply required .....................................115V, 60 HZ.
Liquid Temp. Range .................................. Max. 77°F (25°C)
Operation Position .................................................Vertical
Individual Branch Circuit Required ......................... 15 Amp
Operating Depth

Beginning min .......................... 3/4"

(water level)

Ending max. ..............................1/4"

Discharge .................................................... 1" NPT (25 mm)
Pump water only with this pump.

NOTICE:

This unit is not designed as a waterfall or fountain

pump, or for applications involving salt water or brine! Use

with waterfalls, fountains, salt water or brine will void

warranty.
Do not use where water recirculates.
Not designed for use as a swimming pool drainer.

DESCRIPTION

The submersible pump is designed for water removal in

home applications. Pump can be used for emergency