Master Image MI-WAVE3D, Руководство по установке и эксплуатации

Страница: 40 / 70

Installation & Operation Manual | MI-WAVE3D
© MASTERIMAGE 3D, Inc.
40
LOG Description
Status
# POWER ON : v1.0.0 Power On : Firmware Version Number
RUNNING RUNNING
STOP STOP
2D Current Position : 2D
2D MOVING Actuator Moving to 2D Position
3D Current Position : 3D
3D MOVING Actuator Moving to 3D Position
STOP MOVING Actuator Stop
FREQ : 72.0Hz Sync Change
SYNC PULSE : 3D SYNC PULSE Input [2D/3D]
GPIO 15-9 : 3D GPIO 15-9 Input [2D/3D]
GPIO 37-9 : 3D GPIO 37-9 Input [2D/3D/RUN]
AUTO COMMAND : RUN AUTOMATION COMMAND [2D/3D/RUN/STOP]
Setting
3D POSITION : LEFT ACTUATOR 3D Position Setting
SYNC SOURCE : GPIO Sync Source Setting
AUTOMATION : GPIO(37-9) Automation Source Setting
REFERENCE(1) : 72Hz Reference Sync Frequency Setting
REFERENCE(1) : 72Hz ON Reference Sync Frequency Enabled
REFERENCE(1) : 72Hz OFF Reference Sync Frequency Disabled
POLARITY : TRUE Sync Polarity Setting
PASSWORD : CHANGED Password Changed
IP : 192.168.10.95 Ethernet IP Setting
GW : 192.168.10.1 Ethernet Gateway Setting
MASK : 255.255.255.0 Ethernet Subnet Mask Setting
FACTORY RESET Factory Reset
DELAY 2D : 5 Delay 2D Time Setting
HOST NAME : MI-WAVE3D SYSTEM NAME Setting
MAC : 00-00-00-00-00-00 MAC-ADDRESS Setting
POLARITY(SW) : TRUE POLARITY Mode Switch Setting
3D POSITION(SW) : LEFT 3D POSITION Mode Switch Setting
Error
ERR : ACT NOT DETECT No Connection with the Actuator
ERR : ACT NOT LIMIT No Movement of the Actuator Normally
ERR : ACT FAULT Malfunction Status of the Actuator
ERR : FAN ERROR No Operation of the Cooling Fan