Master-force 241-0854, Руководство оператора

Страница: 17 / 24

Page 16
To avoid serious
personal injury, always disconnect the
plug from the power source when
cleaning or performing any maintenance.
Contact a qualified service technician for
ALL repairs.
Avoid using solvents
when cleaning plastic parts. Most plastics
are susceptible to damage from various
types of commercial solvents and may be
damaged by their use. Use a clean cloth
to remove dirt, dust, oil, grease, etc.
WARNING:
If the supply cord is
damaged, it must be replaced by a
specially prepared cord available through
the service organization.
When servicing, use
only identical replacement parts. Use of
any other parts may create a hazard or
cause product damage. To ensure safety
and reliability, all repairs should be
performed by a qualified service
technician.
Periodic maintenance of your Utila-Tool
allows for long life and trouble-free
operation.
A cleaning, lubrication and maintenance
schedule should be maintained.
As a common-sense and preventive
maintenance practice, follow these
recommended steps:
1. Inspect the tool and accessories; check
them for wear or damage.
2. Keep the ventilation slots clean to
prevent overheating of the motor.
3. The tool maybe cleaned most
effectively with compressed dry air.
Always wear safety goggles when
cleaning tools with compressed air.
MAINTENANCE
4. Use a soft, clean, damp cloth to wipe
the tool housing. A mild detergent
can be used but nothing like alcohol,
petrol or other cleaning agent. Never
use caustic agents to clean plastic
parts.
WARNING:
WARNING:
WARNING: