Master-force 241-0854, Руководство оператора

Страница: 7 / 24

Page 6
SAFETY INSTRUCTIONS
9.
Whenever possible, use clamping
devices or other suitable means to secure
the workpiece to a firm surface.
10. When working with the Utila-tool,
always hold it firmly with both hands and
provide for a secure stance.
The power tool
is guided more securely with both hands.
11.
Keep your workplace clean.
Blends of
materials are particularly dangerous. Dust
from light alloys can burn or explode.
12.
Avoid unintentionally switching on the
tool.
Ensure that the on/off switch is in
the OFF position before connecting to the
power source. Do not carry the power tool
with your finger on the on/off switch or
connect to the power source that have the
switch on.
13.
Do not scrape wet or dampened
materials (e.g., wallpaper) or on moist
surfaces. Penetration of water into the tool
increases the risk of an electric shock.
14.
Keep your hands away from the cutting
area.
Do not reach under the material
being cut.
15.
When operating a power tool outside,
use an outdoor extension cord marked
“W-A” or “W”. These cords are rated for
outdoor use and reduce the risk of electric
shock. The following table shows the correct
size to use, depending on cord length and
nameplate amperage rating of the tool.
When in doubt, use the next heavier gauge.
Always use UL and CSA listed extension
cords.
Recommended sizes of extension cords:
Tool’s Ampere Rating Volts
Total length of cord in feet
Cord size in A. W. G. (minimum)
25’ 50’ 100’ 150’
0-6
120 V~
18 16 16 14
6-10 18 16 14 12
10-12 16 16 14 12
12-16 14 12 Not Recommended