32
Indicates AC output for loads is enabled and inverter is
providing power to the connected loads.
Indicates AC output for loads is enabled but there is no
power provided from inverter. At this time, no battery and
the utility are available. Only PV power exists but is not
able to provide power to the connected loads.
Indicates overload.
Indicates parallel operation is working.
12-3.
Touchable function keys
Function Key
Operation
Function
Enter/ON
Quick touch.
Enter query menu.
If it’s in query menu, touch this
button to confirm selection or
entry.
Touch and hold the button
for approximately 1 second
when the utility is detected
or 3 seconds without the
utility.
This inverter is able to provide
power to connected loads via AC
output connector.
ESC/OFF
Quick touch.
Return to previous menu.
Touch and hold the button
until the buzzer continuously
sounds.
Turn off power to the loads.
Up
Quick touch.
Select last selection or increase
value.
Down
Quick touch.
If it’s in query menu, press this
button to jump to next selection
or decrease value.
Mute alarm in standby mode or
battery mode.
+
Touch and hold these two
buttons for 2 seconds.
Enter setting mode.
NOTE: If backlight shuts off, you may activate it by
touching
any button.
