2.2. Hook-up of motor and track power
Connect the white (+) and the brown (-) wire to the track power leads of
the motor block.
Connect the yellow (+) and the green (-) wire to the motor leads of the
motor block.
2.3. Mounting instructions
You may mount the decoder with either the supplied double-sided tape or
with two screws using the mounting holes.
Please do not damage any cables with the screw heads!
Make sure not to produce a short circuit during mounting.
The rims holding the mounting holes may be snapped off.
3. Additional terminals:
3.1. Terminals on the upper side
eMOTION M Lokfahrdekoder 12
Illustration 5: Hook-up of motor and track power
Illustration 6: Soldering pads upper side