LH
= rear light (-)
LV
= front light (-)
Dek+
= terminal for dec (+) for lights and function outputs [SuSi +]
A2
= function output 2 (-)
A1
= function output 1 (-)
GND
= GND (-) e.g. for the bus terminal and SuSi -
3.2. Terminals on the back side
G- = track (-) brown wire to the motor block
M- = motor (-) green wire to the motor block
GND = GND (-) e. g. for a power buffer
M+ = motor (+) yellow wire to the motor block
G+ = track (+) white wire to the motor block
TxD = bus terminal Data-Out (for Massoth-bus) or [SuSi-clock]
RxD = bus terminal Data-In (für Massoth-bus) or [SuSi-data]
A6 = function output 6 (-), output for pulse simulation [chuff]
13 eMOTION M Lokfahrdekoder
Illustration 8: Soldering pads on the back side
Illustration 7: basic hook-up of light bulbs and other loads