Site
Requirements
13
Need help? Contact [email protected]
Site Preparation
Manual
Floor Surface and Strength
Note: The customer is strictly responsible for surface and load-bearing compliance.
It is important to ensure that the floor surface is solid, smooth, leveled, and free
from any holes or indentations.
Floor covering material should be durable and easy to clean.
The floor of the print production area, as well as that on machine's way from the
unpacking area, must be strong enough to support the entire weight of the
printer, including all accompanying equipment.
Floor load-bearing capabilities for the building in which the Massivit 1800 printer is
to be installed require consulting a construction engineer.
The following information is provided to assist the engineer:
The floor must be strong enough to support the machine, while standing on its 4
supporting pads.
Figure 6-Leveling and Supporting Pads - Specifications
If the floor surface in the print production area is to be tiled, the tiles should be
firmly cemented into position with tile cement applied to the full area of each tile
base (and not just in the center).
Notice: Floor must be level with in a range of ±1.5º, unleveled floor can cause
problems in the printer calibration process.
Содержание 1800 Series
Страница 2: ......
