Massive Audio TW10, Спецификация

Страница: 5 / 8

Transducer Parameter
8
Configurations
Parallel 2 Series 8
NomZ 2 Ohm 8
Sd 0.01318 sqM 0.01318
Revc 1.5 Ohm 6
Levc 1 mH 1
BL 10.2 TxM 19
Vas 18 Liter 18
Cms 125 uM/N 125
Mms 167 Grams 167
Fo 34.8 Hz 34.8
Qms 5 5
Qes
0.529 0.586
Qts 0.478 0.525
no 0.138 % 0.125
SPL@1W 83.6 dB 83.16
SPL@2.83V 90.88 dB 84.41
Xmax/Over Hang 10 mm 10
Xmech/Suspension 24.5 mm 24.5
Watt@RMS 500 Watts 500
Watt@PEAK 1000 Watts 1000
Displacement 0.05 Ft3
Frame Diameter 10.50”
Mounting Hole Diameter 9.50”
Mounting Depth 5.50”
Overall Depth 6.25”
1
0
T
W
10 TW
7
8
TW 10 Ported box for one Sub
TW 10 Ported box for Two Subs
12”
16”
16”
4
”
3”
12”
32”
16”
1
0
.5
”
2”
*Poly-fill 80% of the volume in order to achieve a falter frequency response. (less boomy).
*Box dimensions are external using a 3/4” baffle.
*Approximate adjusting point for the subsonic filter, it should be adjusted until it is audible.
*For less air turbulence, round off inside and outside port edges and fill in the corner to avoid
sharp angles.
*Placing the port in the center of the box will further brace the enclosure.
*circular ports are calculated to fit the same enclosure as slotted port.
H W D Hp Wp Lp Dp Lp
12" 16" 16" 4" 3" 12" 4" 12"
BOX DIMENSIONS SLOTED PORT CIRCULAR PORT
VOLUME TUNNING FREQUENCY POWER SUBSONICS INPEDENCE
1.28 ft3 44.79 Hz 22 Hz - 250 Hz 40-500W 28 Hz 2 or 8 Ohms
H W D Hp Wp Lp Dp Lp
12" 32" 16" 10.5" 2" 11" 2 x 4" 11"
BOX DIMENSIONS SLOTED PORT CIRCULAR PORT
VOLUME TUNNING FREQUENCY POWER SUBSONICS INPEDENCE
2.32 ft3 45.79 Hz 22 Hz - 250 Hz 100-1000 28 Hz 1 or 4 Ohms