Chrome Plated top and bottom plates
:
For enhance cosmetics and to help to help protect the metal from corrosion.
Poly Cotton Damper
:
Poly-Cotton Damper W/ Woven Round Tinsel Lead Wire
for a more linear diaphragm motion.
V Cone:
Ultra light V cone with custom window cut-outs.
For fast accurate and high quality sound reproduction.
1” tall roll santoprene surround:
Custom santoprene surround for maximum excursion and sound quality
bass reproduction.
Reinforced Aluminum Former:
Dual 4 Ohm, 2.5” 4 layer voice coil with 50mm winding length on a
reinforced aluminum former.
Ventilation plate:
Molded ABS plate with chrome finish to insure noise free ventilation
High X-max:
24 mm peak to peak x-max to insure high SPL sound reproduction
1000 Watts max 500Watts RMS
DESIGN FEATURES
4
This subwoofer has to play at a low frequency, Mid-volume
signal for at least 2 hours to loosen the suspension.
This is a requirement to get the best performance from
this sub-woofer.
Pre-install preparation
CAUTION!
Custom tolled steel basket with heavy powder coating:
Y40 High flux Ferrite magnets:
These high energy Y40 magnets will assure sufficient magnetic force
needed for high SPL output.
Heavy gauge stamped steel basket, to minimize vibration.
Heavy powder coating to dampen the basket, to minimize vibration and
ringing noises.
3
CAUTION!
Recommended power range per sub-woofer is
200W - 500W RMS. Exceeding this power range
may increase the likelihood of driver failure.
Subwoofers operated above the recommended
power are not covered under warranty.
