Massive Audio TW10, Спецификация

Страница: 6 / 8

Transducer Parameter
Configurations
Parallel 2 Sereis 8
NomZ 2 Ohm 8
Sd 0.05047 sqM
Revc 1.5 Ohm
Levc 1 mH
BL 10.2 TxM
Vas 45 Liter
Cms 125 uM/N
Mms 186 Grams
Fo 33 Hz
Qms 5
Qes
0.56
Qts 0.5
no 0.33 %
SPL@1W 86.4 dB
SPL@2.83V 93.7 dB
Xmax/Over Hang 10 mm
Xmech/Suspension 24.5 mm
Watt@RMS 500 Watts
Watt@PEAK 1000 Watts
0.05047
6
1
19
45
125
186
33
5
0.608
0.542
0.24
86
87.25
10
24.5
500
1000
Displacement 0.065 Ft3
Frame Diameter 12.25”
Mounting Hole Diameter 11.50”
Mounting Depth
5.75”
Overall Depth 6.50”
10
1
2
T
W
12 TW
9
*Poly-fill 80% of the volume in order to achieve a falter frequency response. (less boomy).
*Box dimensions are external using a 3/4” baffle.
*Approximate adjusting point for the subsonic filter, it should be adjusted until it is audible.
*For less air turbulence, round off inside and outside port edges and fill in the corner to avoid
sharp angles.
*Placing the port in the center of the box will further brace the enclosure.
*circular ports are calculated to fit the same enclosure as slotted port.
TW 12 Ported box for one Sub
TW 12 Ported box for Two Subs
14”
18”
18”
1
2
.5
”
1.5”
14”
38”
18”
1
2
.5
”
3.5”
H W D Hp Wp Lp Dp Lp
14" 18" 18" 12.5" 1.5" 12" 4" 6"
BOX DIMENSIONS SLOTED PORT CIRCULAR PORT
VOLUME TUNNING FREQUENCY POWER SUBSONICS INPEDENCE
1.97 ft3 44.98 Hz 20 Hz - 250 Hz 40-500W 26 Hz 2 or 8 Ohms
H W D Hp Wp Lp Dp Lp
14" 38" 18" 12.5" 3.5" 11" 4 x 4" 14
BOX DIMENSIONS SLOTED PORT CIRCULAR PORT
VOLUME TUNNING FREQUENCY POWER SUBSONICS INPEDENCE
4.36 44.78 Hz 20 Hz - 250 Hz 100-1000 26 Hz 1 or 4 Ohms