Output Panel.
RCA Audio Outputs:
Connect to the RCA Inputs of your amplifiers, observing the correct Left
and Right sides, as well as the output group numbers (1 to 4). Capable of up to 4 V R.M.S. (12.5
V.P.P.), the CORE-1 is an efficient Line Driver that will ensure that the signal is pre-amplified enough
before reaching your amplifiers, consequently, better overall Signal-to-Noise ratio is achieved,
ensuring the best music enjoyment with dynamic, clear, and low-noise signal.
Make sure that the
gain control of your power amplifier is set to the minimum
, to prevent your amplifiers from
saturating due to the strength of the signal output by CORE-1. In case of hiss or noise, please consult
Troubleshooting Item 7.
MEMORY Select button:
Use to switch “on-the-fly” between the 3 available Memory slots.
Once you have successfully created and saved your personal settings to the Memory slots of CORE-
1, you can always choose which Memory slot you would like to use at any time, without needing the
computer.
Please consult “
Saving / Loading settings to / from CORE
” section.
REMOTE Connector:
Connect to CORE-1 Remote control by utilizing the supplied cable.
With the CORE-1 Remote control you will be able to operate the MEMORY Select button as
described above, as well as adjust the Gain of the Output group(s) chosen by you, which could be the
gain of your Subwoofer for example.
