MASSEY FERGUSON MF 300 Series, Руководство по обслуживанию мастерской

Страница: 37 / 41

43. Differential lock function.
44. Four wheel drive function.
45. Parking brake.
46. Operation of all instruments, warning and indicator
lights.
After the Road Test
Check the hydraulic lift performance with a weight or
implement fitted to the lower links.
47. Draft Control.
48. Position Control.
49. Transport - correctly positioned.
50. Constant Pumping - correctly positioned.
51. Response Control - effective.
52. Selector valve - operation.
Auxiliary Hydraulics and Brake Valve:
53. Auxiliary control valve - function.
54. Trailer tipping pipe connection - function.
Final Checks
Carry out these final checks:
55. Ensure that no leaks are apparent from areas
previously cleaned.
56. Check that all safety guards and decals are in place
and correctly fitted.
57. Clean off preservatives and remove labels.
58. Clean the tractor.
59. Ensure that the tool box content is correct and the
Operator instruction Book, Maintenance Chart, and
Service Voucher Book are with the tractor.
TRACTOR INSTALLATION
Instruction
2.01D-02
These instructions are to be given to the Owner and/or
Operator of the tractor, all items must be fully explained
and where applicable, performed. Emphasis must be
given to all safety precautions in the operation and
servicing of the tractor and its implements.
Use the Operator Instruction Book and Maintenance Chart
supplied with the tractor to assist in explaining the
following:
1 . Location and significance of tractor and engine serial
numbers.
2. All safety points and decals on the tractor and in the
Operator Instruction Book.
3. The use of all instruments and controls.
4. Running-in procedure.
5. The operation of the throttle lever and foot pedal, use of
the engine speed indicator, travel and PTO speed
chart.
Servicing the Tractor
6. Use and adjustment of the clutch.
7. Differential lock, its engagement, disengagement and
adjustment.
8. Four wheel drive, its engagement and disengagement.
9. Brakes, latched and unlatched, method of adjustment.
10. The attachment of auxiliary hydraulic equipment.
11. The method of making wheel width adjustments, front
wheel alignment and tyre pressures.
12. Drawbar and hitch positions.
13. Servicing of the tractor, explain the oil changes and
services as detailed in the maintenance section of the
instruction book. Point out the position of the drain
plugs, filler plugs and dipsticks. Include the power
steering reservoirs.
Draw attention to the recommended grades of lubricants
and advise on engine and hydraulic filter replacement and
cleaning.
14. Cooling system frost precautions and the fan belt
adjustment.
15. Maintenance of the engine air cleaner.
Demonstrate the Following:
16. Engine starting and stopping procedure, when hot and
cold.
17. How to remove the air from the fuel system, stress the
importance of clean fuel.
18. Driving the tractor, starting and stopping, the use and
sequence of gears, operation of clutches.
19. Operation of the PTO and the method of changing the
speed.
20. How to use the hydraulic lift system, make adjustments
and attach implements. Use of check chains,
stabilisers and pick-up hitch (when fitted).
Carry Out the Following:
21. Complete the information on the Installation and
Registration Certificate and request the Owner to sign.
22. Enter the serial numbers etc. in the front of the
Operators Instruction Book and hand to the Owner.
23. Explain to the Owner his Warranty entitlement and the
services due during the warranty period.
1D-3
MF 300 series
ACT0027090