MASSEY FERGUSON MF 300 Series, Руководство по обслуживанию мастерской

Страница: 19 / 41

Tractor Specification
1B-5
Electrical System:
Voltage ............................................
Battery.............................................
Alternator...........................................
Light Bulbs
12 volt negative earth
1 battery
45 amp hour
Headlights..............................................................................
Plough and work light.............................................................
Side lights...............................................................................
Stop and rear lights................................................................
Direction indicatiors................................................................
N° plate lights.........................................................................
Range indicator lights.............................................................
Instruments lights...................................................................
Warning lights.........................................................................
Alternator................................................................................
All others................................................................................
45/40 W
55 W
5 W
5/21 W
21 W
5 W
2 W
2 W
3 W
2 W
Hydraulic System:
Linkage pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Four-cylinder scotch yoke pump, driven from the forward
end of the PTO shaft supplying oil under pressure to the
linkage ram cylinder, and four external take off points.
Maximum pump output.............................. 16,7 litre/min.
Maximum pump pressure .......................... 176 - 204 bar.
Filtration ........................................... 140 micron washable strainer.
Maximum lift capacity at the lower links with links horizontal:
All models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..1415 - 1588 kg
Hydraulic linkage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Category 1 and 2 interchangeable ball ends.
Swinging drawbar capacity:
Normal-duty:
Inner position ......................... .
Centre position ....................... .
Outer position ........................ .
Heavy-duty:
Distance drawbar clevis to PTO shaft:
Inner position ......................... .
Centre position ....................... .
Outer position
Drawbar off-set:
1000 kgf.
775 kgf.
775 kgf. 1633 kgf.
1180 kgf.
1180 kgf.
240 mm.
345 mm.
395 mm.
Normal-duty . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 and 240 mm.
Heavy-duty ...........................
194 mm.
Nut torques:
Drawbar frame to transmission case . . . . . . 420 Nm.
Drawbar frame to PTO bracket . . . . . . . . . . . 245 Nm.
Lift linkage capacity:
Interchangeable Cat. 1 & 2 ends . . . . . . . . . 2145 kgf.
Cat. 2 Fixed ends . . . . . . . . . . . . . . . . . . . . . . 2290 kgf.
Drawbars a nd Link a ge :
MF 300 series
ACT0027090