Masport CLUTHA, Руководство по установке и эксплуатации

Страница: 5 / 17

5
5 Masport Clutha - Technical Specifications
Overall Dimensions
Net Weight of the Burner 118 kg
Test Method Emissions
mg/MJ
Emissions
g/kg
Efficiency
%
Authorization
No
Real-Life Test
Canterbury Method V1.6 (ULEB)
National Environment Standard
AS/NZS 4012/13:2014
0.46g/kg
Approx. Heating capability Small to Medium Homes (2~3 Bedrooms)
Flue Shield
900mm Long SS Double Flue Shield (Included in the Masport flue
kit)
Flue System
Std 4.2M Long, 150mm Flue System (GDFLU013M) or Flue System
that has been tested to & comply with AS/NZS 2918:2001 Appendix F
** For installation in Canterbury & South of Canterbury, we recommend extending 200 inner
casings within 250~300 from flue termination. Also, we recommend not to use Masport Opti
or equivalent flue kits in this area, as they take ceiling or external cold air and cool the flue
casings, leading to accelerated creosote build-up in the main flue pipe.
Floor Protector Requirement Ash Floor Protector or Steel Floor Protector
Minimum Clearances to Combustibles: Parallel, Corner & Alcove configurations with Minimum
2.4 m ceiling height.
Parallel Installation Corner Installation
E- Cooktop Corner to Wall 144 mm
C- Glass to Floor Protector Front 300 mm H- Flue Centre to Wall 384 mm
D- Floor Protector Side 117 mm
F- Flue Centre to Rear Wall 231 mm
G- Flue Centre to Side Wall 573 mm N- Flue Centre to Floor
Protector Front 656mm
R- Flue Centre to Wall Corner 543 mm
WW- Overall Width of Fire 495 mm
K- Floor Protector Depth 887 mm DD- Overall Depth of Fire 524 mm
HH- Overall Height of Fire 894 mm
Seismic Restraint - In New Zealand, it is a requirement that the wood burner and floor protector are
secured to prevent shifting in the event of an earthquake. This is best done by fastening the wood burner
right through the protector to the floor, using 8mm Dyna Bolts [ concrete floors] or 8mm coach screws or
equivalent fasteners [ wooden floors]. Seismic holes are located at the rear of the burner.
I- Floor Protector Front Edge 428 mm
J- Floor Protector Width 729 mm
L- Floor Protector Diagonal 1199 mm
M- Floor Protector Side 998 mm
A- Rear Panel to Rear Wall
B-Cooktop Edge to Side Wall
C- Glass to Floor Protector Front 68 mm
325 mm
300 mm
35 mg/MJ
CRC 231303
CRC 231301 66%
NZ National Environmental Safety Test Standard - AS/NZS 2918:2001
NZ National Environmental Test Standards - AS/NZS 4012:2014 and AS/NZS 4013:2014.
Environment Canterbury’s Real-life test
- Canterbury test method CM1.6
Clutha burner model has been tested and complies with the following standards & tests:
495mm Wide x 524mm Deep x 894mm High