background image

Models:
P36-NG3
P36-LPG3

Owners &
Installation

PLEASE KEEP THESE INSTRUCTIONS

FOR FUTURE REFERENCE

Manual

01/16/04

LISTINGS AND CODE APPROVALS

These gas appliances have been
tested in accordance with AG 103,
NZS 5262 and have been certified
by the Australian Gas Association
for installation and operation as
described in these Installation and
Operating Instructions.

Your unit should be serviced
annually by an authorised
service person.

918-015c

WARNING:
Improper installation, adjustment,
alteration, service or maintenance can
cause injury or property damage. Refer to
this manual. For assistance or additional
information consult an authorised installer,
service agency or the gas supplier.

FOR YOUR SAFETY
Do not store or use gasoline or other
flammable vapours and liquids in the vicinity
of this or any other appliance.

Installation and service must be performed
by an authorised installer, service agency or
the gas supplier.

P36 Gas Inbuilt

Head Office - Australia
54 Boundary Rd. Braeside
P.O. Box 553
Mordialloc   3195

Head Office - New Zealand
1-37 Mt  Wellington Hwy.Panmure,
P.O. Box 14349
Auckland 6.

FOR YOUR SAFETY
What to do if you smell gas:

Do not try to light any appli-
ance
Do not touch any electrical
switch: do not use any
phone in your building.
Immediately call your gas
supplier from a neighbour's
phone. Follow the gas sup-
plier's instructions.
If you  cannot reach your
gas supplier, call the fire
department.

Calais / Grenada

Содержание Calais









































Отзывы: