Masport Barbecues, Руководство пользователя

Страница: 13 / 28

13
546565.A.3 - May 2019
STEP 14. ATTACH THE SIDE BURNER SHELF.
a) Hang the side burner assembly onto the protruding screws, insert and partially tighten three M6*12mm screws (B) into the lower holes
as shown.
b) Align the side burner control panel to the main BBQ control panel, then tighten the upper protruding screws.
c) Fully tighten all screws.
Step 13 Preparation to Attach Side Burner Shelf.
Partially screw two M6*12mm screws (B) into the upper holes on the left side
panel of the firebox, leave the screw heads protruding approximately five mm
out.
Step 14 Attach the Side Burner Shelf.
a) Hang the side burner assembly onto the protruding screws, insert and
partially tighten three M6*12mm screws (B) into the lower holes as shown.
b) Align the side burner control panel to the main bbq control panel, then
tighten the upper protruding screws.
c)
Fully tighten all screws.
STEP 15. ATTACH THE SIDE BURNER VALVE AND KNOB.
a) Insert the side burner valve stem from behind the control panel, through the knob bezel, fix the valve with two M4*8mm screws (G).
b) Tighten firmly.
c) Insert the knob (12) onto the valve stem as shown.
WARNING!
DO NOT disconnect the gas hose from the side burner valve. Take care not to twist or kink the gas hose.
Step 15 Attach the Side Burner Valve and Knob.
a) Insert the side burner valve stem from behind the control panel, through the
knob bezel, fix the valve with two M4*8mm screws (G).
Tighten firmly.
b) Insert the knob (12) onto the valve stem as shown.
DONOT disconnect the gas hose from the side burner valve. Take care not to
twist or kink the gas hose.
Step 16 Attach the side burner.
a)
Fit the spill tray and side burner through the shelf and engage the side
burner tube onto the valve nozzle as shown.
b)
Fix the spill tray and side burner firmly in place with three M4*10mm screws
and fibre washers as shown. Make sure the side burner tube is properly
engaged onto the valve nozzle.
c)
Fit the ignition wire onto the bottom of the ignition pin.
d)
Fit the side burner trivet into the three holes in the side burner shelf as
shown.
ENSURE the burner tube is engaged onto the valve nozzle as shown.