Masimo sedline, Руководство оператора

Страница: 26 / 66

SedLine Sedation Monitor Chapter 4: Operation
www.masimo.com 24 Masimo
EEG Display
EEG Waveforms
The EEG display reflects electrical activity of the frontal and pre-frontal cortex of the brain.
The display is configured to contain four (4) data input sources. These input sources are
acquired from electrodes on the sensor: L1, R1, L2, and R2. After input data is acquired, the
data displays as trends.
1 EEG Chart Speed* 2 EEG Amplitude*
* Touch to adjust the max and min values.
The vertical axis displays the electrode source. The data values are conveyed by horizontal
gold trend lines which scroll from left to right across the display. The horizontal axis
represents time. The trend amplitude and speed are configurable by the user. Pressing the
chart speed on the bottom left corner or the amplitude in the bottom right corner leads the
user to adjust the max and min values directly.
Note:
When Synchronized Waveforms on Root are Enabled (On) under Access Control, the
EEG Chart Speed cannot be changed. Refer to the Operator's Manual for Root.
Electrode Status
This feature in the SedLine window is used to monitor electrode impedance. To reveal the
Electrode Status Display, swipe down on the tab shown below.
Note: The feature can be enabled or disabled though Additional Settings on page 40.