Masimo Rad-67 Pulse CO-Oximeter, Руководство оператора

Страница: 43 / 106

Rad-67 Chapter 4: Operation
www.masimo.com 41 Masimo
To access any of the available parameter setting screens:
1. From the Parameter Settings screen, to access the desired parameter, swipe the
on-screen icons left or right.
2. Touch the icon of the desired parameter.

See SpO2 Settings on page 41.

See PR Settings on page 42.

See SpHb Settings on page 42.

See Pi Settings on page 42.
SpO2 Settings
Allows access to any of the following options:
Additional Settings for SpO2 on page 41
About Parameter Information on page 43
Additional Settings for SpO2
From the Additional Settings screen, change any of the following options:
Options Description Factory
Default
Settings
User Configurable
Settings
Averaging
Time* The length of time over which the
system calculates the average of all
data points.
8 seconds 2-4, 4-6, 8, 10, 12, 14,
or 16 seconds**
FastSat See FastSat Overview on page 41. Off Off or On
* With FastSat the averaging time is dependent on the input signal.
** For the 2 and 4 second settings the averaging time may range from 2-4 and 4-6 seconds,
respectively.
FastSat Overview
FastSat enables rapid tracking of arterial oxygen saturation changes. Arterial oxygen
saturation data is averaged using pulse oximeter averaging algorithms to smooth the trend.
When Rad-67 is set to FastSat On , the averaging algorithm evaluates all saturation values,
providing an averaged saturation value that is a better representation of the patient’s
current oxygenation status. With FastSat set to On, the averaging time is dependent on the
input signal.