Masibus LC-12, Руководство пользователя

Страница: 23 / 52

P a g e | 23 of 52 User Manual
Switch Status Switch Status Icon
Switch OPEN (OFF)
Switch CLOSE (ON)
Switch OPEN Reading Displays the Source Reading value after the switch OPEN
was detected.
Switch CLOSE Reading Displays the Source Reading value after the switch CLOSE
was detected.
Source Window
Output Type
Source Display Mode
Source Reading
Source FeedBack Reading
Source Info 1
STEP/RAMP Icon Refer Measure Window Table of M Source Display
Mode on Page 19.
3.2.4 Display Operations
There are mainly four types of widgets available in the Device Menu
Style.
i. ListBox
ii. EditBox
iii. CheckBox
iv. RadioButtonBox
The below section will show how to change the value of different
widgets.

ListBox
ListBox are used when there is a limited amount of preset values.
You have to select one of the available options. The list of
available options is displayed in the Centre part.
A ListBox List opens when you press the F1 key. Use UP/DOWN
key to scroll through the available options. Select one of the
options with the
ENTER key.
Example: How to change of Input Type (I/P Type) from mA to mV.
This Option is available in
MENU

MEASURE Page.