Masibus LC-12, Руководство пользователя

Страница: 20 / 52

User Manual P a g e | 20 of 52
Measure Info 2 Shows the One of the available Addition Information.
This can be selected by Additional Info. 2 List in
MENU  DISPLAY  MEASURE page.
This will disable if Bargraph is selected as Additional Info1 in
MENU  DISPLAY  MEASURE page.
HART Icon HART Enable Status Icon.
This icon will appear if HART is enabled from
MENU  SETTING  HART page. (This icon is visible for
mA(24V) Input Type only. For other Input Types this will
invisible regardless of HART settings)
Source Window
Output Type The Output Type.
mA mA Current Output
mA(2W) mA Current (2-Wire Simulation) Output
mV mV Voltage Output
V V Voltage Output
Source Display Mode The Source Reading Display Mode.
Actual Displays the Raw Output Value without any
scaling
Percentage Displays the Percentage Value in (0.00% -
100.00%)
Scaled Displays the Scaled Value
Source Reading The Reading as per the Source Display Mode
Source Feedback
Reading
The Feedback ADC Reading in Output Unit.
This will disable if Bargraph is selected as Additional Info1 in
MENU  DISPLAY  SOURCE page.
Source Info1 Shows the One of the available Addition Information.
This can be selected by Additional Info. 1 List in
MENU  DISPLAY

SOURCE page.
STEP/RAMP Icon Shows the Icon indicating STEP/RAMP mode.
Manual Step Rising Ramp
Step UP Falling Ramp
Step DOWN
Ramp Hold
@ 0%
Ramp Hold
@ 100%