Ref. No: m94B/OM/101
Issue No: 00
Operator’s manual
Page 15 of 16
(7). HT16u Battery Replacement:
Remaining battery life displays on home screen, logger would stop working after
battery life ran out. Make sure to check battery status before starting new recording.
1.
Lift up mother-board from enclosure by detaching back-case. If necessary, use a
small, flat object, such as a flat-tip screw driver or tweezers to lift the mother-
board.
2.
Turn off switch no. 1 before applying new batteries.
3.
Lift the battery from the battery compartment by gently pressing metal latch .
If necessary, use a small, flat object, such as a flat-tip screw driver or tweezers to
lift the battery from the compartment.
4.
Insert the new battery with the positive polarity (+) facing up , at an angle under
the metal latch. Push the end in until you hear a click.
5.
Turn on switch no. 1 after applying new batteries. Make sure LCD screen displaying
data, if LCD fail to glow up, check battery polarity.
6.
Reattached mother-board by aligning to enclosure connector. Repack back-case
properly.
Image simulated here is illustration purpose only.
Caution:
Make sure that the battery is fully inserted under the plastic tabs. If the battery is not
fully inserted, damage can occurs.
Make sure that the both batteries are fully new for longer battery life, don’t apply old one
with new.
Battery replacement cause losing the clock and calendar data.
