Ref. No: m94B/OM/101
Issue No: 00
Operator’s manual
Page 13 of 16
6.5 LCD Messages:
(1)Logging START Indication:
Example below represent Logging START indication. As shown in LCD upper bar ‘
-
‘ above
left most digit indicates Logging is Started. When data logging start by key-panel or SMART-
HT configuration software unit will punch event log as START in data-report.
(2)Logging PAUSE Indication:
Example below represent Logging PAUSE indication. As shown in figure upper bar ‘
-
‘ & MAX
symbol disappear from LCD screen indicates data-logger is in PAUSE state. When data
logging pause by key-panel or SMART-HT configuration software unit will punch event log as
PAUSE in data-report.
