Masibus HT16Ew, Руководство пользователя

Страница: 22 / 26

Ref. No: m94A/OM/201
Issue No: 01
Operator’s manual
Page 22 of 26
blink. Now using INC key user can change first digit. Now if user press the DCR key,
cursor moves to second digit. Now using INC key user can change second digit.
On the press of MENU key again, save Yes/ save No (
S.Y
/
S.n
) screen will appear for
saving new change. If user will press “
S.n
” (INC Key) then it will discard the new
changes. If user will press “
S.Y
” (DCR Key) then it will set unit as day.
Factory default value of
Hbnd
is
2.0
% RH
.
If user press DCR key in between, it will shows the main menu screen.
(3)
FCtr
(Frame Counter) Mode:
FCtr
counts numbers of frame that are delivered to CDU/85xx+. If frame counts is
greater than
9999
then
FCtr
resets to
0000
automatically. In between user can
reset
FCtr
.
On the press of MENU key, save Yes/ save No (
S.Y
/
S.n
) screen will appear for saving
new change. If user will press “
S.n
” (INC Key) then it will not reset
FCtr
. If user will
press “
S.Y
” (DCR Key) then it will reset
FCtr
to
0000
.
If user press DCR key in between, it will shows the main menu screen.
(4)
Lo9 oFF
/
on
(Log Active Status) Mode:
In case of communication break with CDU/85xx+, HT16Ew start logging data itself in
flash memory. When communication re-established then HT16Ew transmits all log-data
stored in flash memory. Log active status can be changed by this mode.
On the press of MENU key, save Yes/ save No (
S.Y
/
S.n
) screen will appear for saving
new change. If user will press “
S.n
” (INC Key) then it will not save any new changes. If
user will press “
S.Y
” (DCR Key) then it toggle Log Active Status.
Factory default Log Active Status is
Lo9 oFF
.
(5)
LCtr
(Log Counter) Mode:
LCtr
counts numbers of frame that are delivered to CDU/85xx+. If Log counts is
greater than
9999
then
LCtr
resets to
0000
automatically. In between user can
reset
LCtr
.
On the press of MENU key, save Yes/ save No (
S.Y
/
S.n
) screen will appear for saving
new change. If user will press “
S.n
” (INC Key) then it will not reset
LCtr
. If user will
press “
S.Y
” (DCR Key) then it will delete all log-data stored in flash memory &reset
LCtr
to
0000
.