Masibus HT16Ew, Руководство пользователя

Страница: 26 / 26

Ref. No: m94A/OM/201
Issue No: 01
Operator’s manual
Page 26 of 26
Step-4 Make sure battery polarity match with respective battery holder before inserting
new battery. Switch on unit after inserting new battery. Make sure device on properly
by looking display parameters. follow reverse procedure do boxing and mounting of
unit on back-plate.
Note: Battery used for End device (Sleeping Device) only
For Router device, user has to give 5V USB charger for continuous power.
(10). Communication:
Transmitter is communicating on Wireless RF 2.4 GHz Zigbee Protocol with central
Logger Unit. Transmitter is battery operated low power unit which is sending data on
Push time interval defined by user to Logger unit. Time interval should be 1 min, 5 min,
10 min and in hours.
After every data Push on intervals it will go in deep sleep mode till next interval which
will save power for long battery life.
In one network, all transmitters and one Logger unit should be configure with same
PAN ID.
CONTACT DETAIL OF SERVICE DEPARTMENT
Masibus Automation & Instrumentation Pvt. Ltd.
B/30, GIDC Electronics Estate,
Sector-25, Gandhinagar-382044, Gujarat, India

+91 79 23287275-79

+91 79 23287281-82
Email: support@masibus.com
Web: www.masibus.com