16
17
G
F
H
I
A
B
C
D
E
Caution
When you are finished turning, the turn signals do not turn off automatically.
You have to press this button to stop them.
Dimmer switch
A
Press the button, using the switch allows
you to choose the distance of the headlights :
high or low.
High beam
Low beam
Turn signal switch
B
Use the turn signals to turn left or right.
Operate the button to the left or to the
right, the indicator will flash. Press the switch
again to stop the turn signal.
(R) Turn right
(L) Turn left
Horn Button
C
Turn the key switch to the ON position, press
the horn button and it will emit a sound.
Headlight flasher switch
D
The flasher can be used to signal its presence.
Clutch grip
E
Allows the motor to be disengaged in order to
change gears.
Caution
Only use the emergency stop switch in an emergency situation.
Electric starter button
F
Press this button to start the engine.
Caution
Make sure that the vehicle is always in
neutral position (N or 0) and always operate the
clutch grip before starting the engine
Engine shutdown switch
G
It is used to manually stop the motorcycle in an
emergency situation.
Position it on
to be able to start the engine.
Front brake grip
H
To apply the front brake, gradually press the
brake grip located on the right handlebar. Since
the motorcycle is equipped with hydraulic braking,
the brake lever should not be manipulated either
sharply or roughly. Pressing the lever automatically
turns on the brake light.
Accelerator grip
I
It makes it possible to vary the speed of
rotation of the motor. The acceleration is done
by making it turn towards you; deceleration, by
releasing the handle.
V - Control system
Left handlebar control system
Right handlebar control system
