26
27
1
2
Pre-ride inspection
Before road, remember to check the following points. Never underestimate the
importance of inspection.
Element
Control to be carried out
Handlebar
Ensure that direction is:
- soft
- free
- no hard point in rotation
Lighting
Operate all lights (front light, rear light, front and rear brake light,
instrument cluster lighting, turn signals)
Engine oil
Check the oil level
Coolant
Caution
This engine has a liquid cooling system. During the operation of the
motorcycle, the coolant is at high temperature and high pressure in the cooling
system. Therefore, it is strictly forbidden to open the radiator cap in this condition,
in order to prevent and avoid burns.
The coolant must be added in time and in sufficient quantity to avoid damage
to the engine.
Coolant should be added after the engine has stopped and cooled down.
Antifreeze belongs to the chemicals, which include toxic substances. If the
antifreeze gets into the eyes or on the skin, wash immediately with plenty of
water.
Coolant tank
On the right side of the front end of the
vehicle’s fuel tank is equipped with a coolant
make-up tank ① and the radiator cap ②.
The coolant top-up tank ① is equipped with
level graduations in the tank, the level should
be between upper and lower graduations.
When the water level is below the minimum
limit, open the radiator cap ②, add special
antifreeze to the makeup tank, do not add tap
water or other liquid
Brakes
- Adjust the «play free» of the rear brake pedal and the front brake
lever
- Ensure effective braking
- Check for leaks
Indicator lights
Engine light, gear engaged, oil level, turn signals, high beam
Accelerator grip
- Check the tension of the accelerator cable
- Check that there is no hard point or resistance in the rotation of
the handle and that it returns to the initial position.
Tires
Check the tire pressure
Check the depth of the tread patterns (wear)
Check for nicks or cracks
Audible warning device
(horn)
Ensure proper operation
Clutch
Check the tension of the clutch cable.
Check its proper functioning and the effectiveness of the clutch
Fuel
Fill the tank with the correct fuel.
Do not overfill the reservoir.
Transmission
Check the tension.
Check lubrication
Coolant
Check coolant level
Check for leaks
Rules of conduct
Warning
If this is your first time riding this type of motorcycle, we recommend that you
familiarize yourself with its controls and operation on a low-traffic road until you
have mastered it.
Before setting off, check that the sidestand is correctly raised.
Do not accelerate sharply or downshift in a turn or change of direction.
Slow down enough when braking before entering a turn.
It is dangerous to operate a motorcycle with one hand. When riding, always hold
the handlebars firmly with both hands and keep your feet on the footrests. Never take
both hands off the handlebars at the same time.
On wet roads, the friction force being low, the braking distance increases and it is
more difficult to change direction: so remember to decelerate in advance.
Always respect traffic rules and speed limits
