39 | 50
Installation Manual LOGS50 EN_MI_090221
Identifier of the variable(s)
Value(s) of the variable(s)
Date and time stamped in the format of: “DD/MM/YY hh:mm:ss”
The system verifies the message has been delivered to the network, but not if
the addressee has received it. The SMS delivery to the addressee is the duty of
the mobile phone company. In any case, LOGS50 unit makes three attempts to
send the message; if the three attempts failed then the logger would record that
fact in the alarm history log.
2.1.5. GSM / GPRS ALARM MESSAGE SENDING TASK
It is possible to send a GSM / GPRS / 3G alarm by event or by time repetition
pattern. A GSM / GPRS / 3G alarm can be linked, with a certain event or with
certain periodicity, to the sending of a GSM message constructed with a
determined text string and addressed to specified addressee(s). In this case,
the addressee must be a specific program SOFT50 able to process and present
correctly the info received).
2.1.6. GSM / GPRS / 3G VARIABLE GROUP SENDING TASK
It is possible to send a group of variables when an event occurs or through a
repetition pattern. When the conditions configured take place a group of
variables is sent by GSM / GPRS / 3G to a configured addressee. The
addressee must be a specific program SOFT50 able to process the information
received.
2.1.7. MESSAGE REGISTER
By means of this task, it is possible to keep a record of the text string with the
message of an alarm in the alarm history log.
2.1.8. SEND DATA LOG TASK (HD)
It is possible to send data history log by event or by time repetition pattern. A
GSM/GPRS data history log can be linked, with a certain happening or with
certain periodicity, to the sending of a GSM/GPRS data history log.
History log
consists of values of the variable recorded from a preceding time to the time
being at that moment. This former time can either be from the start time of
registering or from the last time the memory containing the history log was
erased. Data history log will be sent via GSM/GPRS/3G to a certain addressee
specified within the LOGS50 configuration. In this case, it is compulsory that the
addressee be SOFT50 able to process and present the info adequately.
When LOGS50 works in master mode, a correct transfer of the data
history log implies its erasure automatically. The new registers will be
recorded in a new data history log. The statistic computes will also be
reset to the initial values.
