16 | 50
Installation Manual LOGS50 EN_MI_090221
1.
GENERAL
1.1. INTRODUCTION
This manual presents installation and operation instructions for LOGS50
loggers, a device designed to: collect, register, send data, detect and send
alarm messages, act on digital outputs, receive communications from the
outside, etc.
Its functionality is not predefined, the user decides to give specific operations to
his group loggers; therefore, it is necessary to upload a set of operating
instructions to the LOGS50 so that every unit knows exactly the tasks have to
be undertaken.
LOGS50 has two working modes:
-
Standard mode
: where data logging and GSM / GPRS / 3G activities are
executed.
-
Low power consumption mode:
Between two activities of data logging the
device remains in low power consumption mode so that it can save energy to
make the battery last longer.
1.1.1 PRODUCT GENRAL FEATURES
LOGS50 has a minimum autonomy of 3 years (at 25ºC and 5 minutes of
communication per day), being prepared to work in a wide range of
temperatures ranging from -20ºC to +60ºC and enduring a maximum level of
vibrations in operation conditions of 0.76 m
2
/s
3
(10-12Hz).
The enclosure features are:
Ingress protection level. Two version; IP67 version (ABS enclosure with
white lid) and IP68 version (ABS enclosure with ash grey lid)
Up to 4 IP68 metallic circular mini connectors.
Data recordings are stored in engineering units (
e.g.: m
3
/s, ºC, etc.
). Every
history data recording besides their predefined values also include a time stamp
that corresponds to the moment of the data acquisition.
The product has the option of being re-programmed to incorporate new
firmware updates.
Last, GSM / GPRS / 3G module works with a SIM card the user should acquire
in advance and place it in the holder the same as it is done in a mobile phone.
