Maschio F07011424, Использование и обслуживание

Страница: 38 / 96

USE AND MAINTENANCE
38
ENGLISH
cod. F07011424
Check the state of wear and the integrity of the tractor con-
necting elements and of the structural elements. The machine
cannot be used if anomalies are noted. Contact your dealer
immediately.
4.1 GENERAL CLEANING
Cleaning operations must be carried out periodically in order to
guarantee good machine performance.
To clean the equipment, proceed as follows:
- park the machine in a suitable place with the side frames open
and resting on the ground;
- detach it from the tractor;
- wash it with a water jet, wherever possible from the outside;
- remove any soil and plant residue using a broom or brush;
- dry the machinery.
ATTENTION
Do not climb up on the machinery or on the rollers to clean.
4.2 DISASSEMBLING FOR MAINTENANCE OR REPAIR
During disassembling and re-assembling of the various parts of
the equipment, ensure thet the said parts have been assembled
in the correst order (if necessary, mark the various parts during
disassembling).
Please refer to the drawings and photos shown in this manual.
Before disassembling the equipment, be sure to:
- park the machine in a place that is large enought to permit
obstruction-free disassembling with the side frames open and
resting on the ground;
- detach the equipment from the tractor;
- cordon off and suitably mark the operations area;
- carefully inspect the physical state of the disassembled parts and
replace them if damaged.
ATTENTION
Do not stand underneath suspended loads.
Access to the operations area is forbidden to non authorised
personnel.
Working overalls, safety footwear, gloves and glasses must
be worn.
4.3 RESIDUAL RISKS
ATTENTION
Fire risk.
Do not smoke or use naked flames near the machine: this
could set off a fire in the oil of the hydraulic circuit.
Before making repairs on the machine using arc or flame
welding, ensure thet there are no oil leaks from the hydraulic
circuit.
ATTENTION
Risk of pollution when draining of oil from the hydraulic circuit.
Used oils must be discharged and disposed of according to
the legislation in force in the country in which the machine
is being used.
ATTENTION
Risk of pressurised oil jets being ejected.
The operator must use safety glasses, working overalls, safety
gloves and footwear to ensure that any oil splashes do not
injure eyes, face or uncovered body parts.
ATTENTION
Risk of cutting and blows during cleaning, adjusting and
maintenance of the machine.
The moving parts (anchors, spiked rollers, soil-breaking
discs) represent a potential injury risk for the operator. Use
appropriate PPEs.
ATTENTION
Risk when transporting the equipment by road.
The transporting of the equipment by road at night or in
conditions of poor visibility without the appropriate lighting
devices is strictly prohibited as it could lead to accidents.
ATTENTION
Never transport the equipment by road with the external
accessory discs in the operating position or not fastened with
the pin specifically designed for the purpose as this could
lead to accidents due to the exceeding of the dimensional
clearance limits laid down by the Highway Code.
ATTENTION
Risk of crushing the operator or third parties present in
the area around the equipment during transportation and
handling.
The operator must ensure that there are no third parties
present in the area around the equipment during these phases.
ATTENTION
Loss of pressure in the hydraulic circuit during operation.
The operator must run the necessary checks and perform
the periodical maintenance indicated in this manual, in order
to ensure that all parts of the equipment are kept in perfect
working condition.