Assembling: Reassembling stanchion tube, slider and sealing rings
Fit the top guide bush (
9
).
With the help of spacer (
8
) press the top bush into the slider.
Insert the bottom guide bush (
7
) in its seat.
If necessary, use the introducer to help the guide bush insertion.
Insert the spring cup (
4
) in its seat.
Smear the dust seal and the sealing ring with some grease.
Insert the sealing ring (
3
) in its seat with the special introducer (
A
).
Using a hammer, knock in introducer (
A
) and drive the sealing ring home into the slider.
Using a small flat-tip screwdriver, fit stop ring (
2
) and check that it fits perfectly into its groove.
Take great care not to damage the internal surfaces of the slider when fitting the stop ring.
Insert dust seal (
1
) in the stanchion tube.
Insert the stanchion tube (
5
) in the slider (
6
).
© Marzocchi Suspension
2005
-
Shiver DC
