7
2
3
FIG. 1
SPRING CHANGE
PRELOAD KNOB FIG. 1
STOP RING FIG. 2
STANCHION TUBE CAP
FIG. 3
SPRING FIG. 4
FORK OIL CHANGE
HYDRAULIC
CARTRIDGE
CHANGE (right leg)
FOOT NUT FIG. 5
HYDRAULIC CARTRIDGE
FIG. 6
PILOT BUSHING AND
SEAL ASSEMBLY
CHANGE
STANCHION TUBE FIG. 7
DUST SEAL FIG. 9
STOP RING FIG. 10
OIL SEAL FIG. 11
UPPER WASHER FIG. 12
PILOT BUSHING FIG. 13
PUMPING ROD
FIG. 8
REBOUND STOP
RUBBER FIG. 8
REBOUND SPRING
FIG. 6
DISASSEMBLY DIAGRAM
SPRING CHANGE
FIG. 1
Move the knob (2) to the minimum preload position.
Loosen the small Allen bolt (3) fastening the preload knob by means of
a 1.5 mm Allen wrench. Remove the knob from the cap assembly.
