11
18
17
16
B
FIG. 14
FIG. 15
FIG. 16
REASSEMBLY
CAUTION: before reassembling, all metal parts should be washed
carefully with inflammable and biodegradable solvent and dried with
compressed air.
PILOT BUSHING AND SEAL ASSEMBLY
FIG. 14
Check that no dirt or debris is between slider and bushing. Insert the
pilot bushing (18) into place so that it adheres to the slider.
FIG. 15
Fit the upper washer (17) into the slider so that it touches the pilot
bushing.
FIG. 16
Lubricate the oil seal (16) and place it onto the seal press (B) with the
hollow side toward the slider.
Press the oil seal into place until it touches the lower washer by using
the above seal press.
15
FIG. 17
FIG. 17
Insert the stop ring (15) making sure it is properly seated into place.
