Marzocchi BOMBER 2005, Руководство пользователя

Страница: 48 / 59

Summarizing tables
M
Z
024
English
6
136
Table 6.9: 888 Series
888 RC 888 R
888 RC 888 R
888 RC
Rebound adjustment with external register – Right leg
When turning the adjuster clockwise, you increase the rebound hydraulic
braking, making the fork slower during the rebound phase.
When turning the adjuster counterclockwise, you decrease the rebound
hydraulic braking, making the fork more responsive during the rebound phase.
Compression adjustment at travel end – Left leg
When turning the adjuster clockwise, you will increase the compression
hydraulic braking at travel end.
When turning the adjuster counterclockwise, you will decrease the
compression hydraulic braking at travel end.
A
B
C
D
Preload spring
Using a 26 mm wrench unscrew both fork’s upper caps (A).
Lower the stanchions as much as needed to allow the shaft to come out the
cartridge.
Press and keep pressing downwards the washer (B) supporting the spring.
Using a small screwdriver, take off from its seat the metallic wire (C) that is
locking the washer (B) supporting the spring.
Keep the washer pressed and insert the metallic wire into a lower notch to
increase preload, or into an upper notch to reduce it.
During the extraction and the insertion of the metallic wire be very
careful not to damage the components. If the pumping rod and more
precisely the metallic wire (C) are even slightly damaged, do not use the
fork in any case and immediately contact a Marzocchi authorized service
centre. Do not alter the metallic wire.
Lift the stanchions and tighten the fork’s upper cap (A) using a 26 mm wrench
to the required torque (10±1 Nm).
During the insertion of the cartridge inside the stanchion be very careful
not to damage the O-Ring (D).
170 -200 888 RC
888 R
888 VF
170 -200
* the 8” brake system installation is allowed using an adapter provided by the brake system manufacturer
170 -200
ø 20 mm through hole axle
ø 20 mm through hole axle
ø 20 mm through hole axle
INTL STD 6" *
INTL STD 6" *
INTL STD 6" *
NO
NO
NO
T
V
888
35 mm 2,8" x 26"