manualshive.com logo in svg

Marzocchi BOMBER 2005, Руководство пользователя

Поделиться
Скачать
Marzocchi BOMBER 2005 Скачать руководство пользователя страница 13

Technical information

M

Z

024

English

2

101

Spring systems

Right leg

Left leg

66 RC

HSCV cartridge with rebound 

outside adjustment

HSCV cartridge with compression 

outside adjustment at travel end

66 R

HSCV cartridge with rebound 

outside adjustment

Not adjustable SSV damping rod

66 VF

Pompante SSVF non regolabile

888 RC

HSCV cartridge with rebound 

outside adjustment

HSCV cartridge with compression 

outside adjustment at travel end

888 R

HSCV cartridge with rebound 

outside adjustment

Not adjustable SSV damping rod

888 VF

Not adjustable SSVF damping rod

Junior T

Not adjustable SSV damping rod

Monster

HSCV  cartridge with rebound 

outside adjustment and 

compression outside adjustment at 

travel end

HSCV cartridge with compression 

outside adjustment

Shiver SC

HSCV cartridge with compression outside adjustment

Shiver DC

HSCV cartridge with compression outside adjustment

* Optional configuration

SSV: 

the SSV system, thanks to the speed

sensitive valve, allows control of the damping
based on the fork’s compression and rebound
speed as well as the fork’s position in the travel.
SSV pumping rods can have a fixed setting or
adjustable rebound by internal adjusters.

SSVF: 

in the SSVF system, the evolution of the

SSV system, the fork’s sensitivity is further
improved, thanks to the spring-preloaded valve.
SSVF pumping rods can have a fixed setting or
adjustable rebound by internal adjusters.

HSCV:

 the HSCV system allows more

controlled damping, by adjusting the fork’s
sensitivity to the trail type and resisting
bottoming. The HSCV system can absorb harsh
impacts helping you to keep the mountain bike
control.
The HSCV cartridges may be provided with
rebound or compression external adjustment.

ETA: 

the ETA system allows adjustment of the

extension travel and fork’s locking but still
offering 25-30 mm of travel.

TAS: 

 the TAS system, not only offers, like the

ETA system, the extension travel adjustment,
but also the modification of the total  travel: in
this way the fork’s maximum length can be
increased by 20 mm.

TST: 

the TST system uses a sealed cartridge

with a rubber lung for oil collection. The TST
cartridge is provided with a rebound adjuster in
the lower area and a 5-positions compression
adjuster in the upper area.

DOPPIO AIR: 

the DOPPIO AIR system is

provided with three independent air chambers,
allowing customization of setting according to
the rider’s needs.

Содержание BOMBER 2005




























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды