With the special 15mm key, tighten the left bottom nut (
1
) complete with O-ring (
2
) to the required
torque (
10 Nm ± 1
).
Using introducer (
A
) insert the dust seals (
11
) in their seats.
Assembling: Filling with oil
Block the fork in the vice, in perfectly vertical position.
Lower the crown-stanchion unit on the arch-slider assembly.
In a graduated recipient, prepare the quantity of oil to pour into the fork leg (see table).
Pour roughly 1/3 of the oil required into each stanchion, then pump the fork a few times to eliminate any
traces of air.
Pour the rest of oil in.
© Marzocchi Suspension
2006
-
66 SL
