ASSEMBLY INSTRUCTIONS
1. Install a rubber packing onto one of the 1 inch hose fittings. Slide a hose fitting nut over the fit
ting. Slide two hose clamps over the suction hose. Attach the hose coupler assembly and
strainer to either end and tighten the hose clamps.
Due to different operator requirements, the outlet hose is not provided. Three hose fittings are
supplied with water pump to be used with either 5/8, 3/4 or 1 inch inside diameter hose. Select
an outlet hose that is the suitable diameter and length for your application.
Once you have selected the outlet hose, assemble the appropriate hose fitting, packing and
notand secure the fitting to the hose with the hose clamp.
STRAINER
CLAMP
SUCTION HOSE
CLAMP
2. Fix the suction hose and the outlet hose to the pump, as shown.
COUPLING
PACKING
NUT
WARNING:
Always use the suction hose and strainer provided among the standard acces
sories. II another suction hose is used, it must be used with the strainer.
A crush resistant hose is recommended.
*
During operation, ii the suction hose is crushed, it can cause the pump to fail.
SUCTION HOSE
OUTLET HOSE
